the high temperature of about 200℃ will solidify rubber into the sharp of bracelet. let"s see how the mould come into being. Mold, industrial production to use injection, blow molding, extrusion, die-casting or forging and forming, smelting, stamping and other methods to get the various models and tools of the required products. In short, mold is used to make molding tools. This tool is made up of various parts, and different molds are made up of different parts. It mainly realizes the processing of the shape of the articles by changing the physical state of the formed material. It has the title of "the mother of industry". The most important factors of mold material are thermal strength and thermal stability. Materials used for common materials: working temperature, forming materials, mold materials. buy-wristbands-onlinebuy-rubber-wristbands nt and easily stick with dust , hair and other impurities. Third, when it burned with fire, the false silicone bracelet will come up with the black material on the edge while the true one shows white powdebottle opener ringr. And final, tell a reliable method to clean the bracelets. Get it soak in warm water for 3-5min, rub a few and add the detergent if necessary. Then all done after drying by air. After proper dewatering , the silica gel mSiO2?nH2O become a porous mass that is of different particle size. This is so called the silicone. The silicone has the open vesicular structure , large specific surfbottle opener ringace. So it can absorb many substances as a good desiccant, adsorbent and catalyst carrier. Adsorption of the silicone is mainly the physical one that can be regenerated and good for repeated use. Let the silica gel soak in the cobalt dichloride solution then get it dried and activated , will become the allochroic silica gel. It will transfer from blue to red color when absorb water. Changes in color shows the degree of water absorption and whether need the regeneration treatment.